Baumatic BAF90EG, Руководство пользователя

Страница: 20 / 28

20 Baumatic BAF90EG 900mm Upright Oven User Manual
Cooking Functions
Signal
• The signal after “time out” will stay 7 minutes if it has not been reset with “time of day” button.
• The following signal will be skipped if time of day is pressed during the last 15 seconds of the timer.
Signal frequency
• If no function is activated, the signal frequency can be selected by pressing the "-" button.
• Three different frequencies (1,5 ; 2,0 ; 3,0kHz) are selectable.
Using the Touch Clock (fig.27)
Mains frequency detection
• At power on mains frequency is determined. When the timer is
connected to 60Hz, the Celsius symbol is flashing during start-up.
Power On
• At power on, the relay contact is opened. The display and AUTO symbol
flashes and time of day starts from 0:00. Power on state with flashing daytime remains until time of day is set.
Setting Time of Day
• Press PLUS and MINUS button simultaneously. At Power On, also MODE button is possible.
• Time of day can be set with PLUS or MINUS, while the colon between hours and minutes is flashing.
• Quick setting mode starts when PLUS or MINUS is held for more than 1 second. If daytime setting mode is
selected while an automatic program is active, the automatic program is cancelled.
The Buzzer
• The buzzer interval alarm signal sounds if minute minder has reached the end time. The signal can be switched off
by pressing any key or by passing the signal duration limit.
Changing the Buzzer frequency
• First press Plus and Minus simultaneously (menu far editing the time) and then Mode for selecting the menu far
changing the buzzer frequency. While the text is visible the buzzer signal frequency can be changed by touching
Minus repetitively.
• Note: If the touch pad is inactive, a visual alarm will only be reset when a valid key combination is pressed far more
than 2 seconds.
Clearing Programs and Manual function
• The duration of the minute minder can be cleared by
• a) "clear Function": First select minute minder program, then press PLUS and MINUS button simultaneously.
• after this clear the display returns from adjustment mode to time of day immediately.
• b) Back counting of duration to zero. The timer remains in adjustment mode.
Minute Minder
• While minute minder mode is selected, the Bell symbol flashes and the display reads the remaining time in hours
and minutes, only if the last minute is counting down the remaining seconds are displayed. An active minute
minder program is indicated by the statically illuminated Bell symbol. If alarm time has finished, an acoustic interval
signal sounds and the Bell symbol flashes.
• The minute minder program runs independently of other programs.
Key Lock
• After power on reset or when no key is pressed for 7 seconds, the key look function is activated. Pressing a valid
key or key combination for 2 seconds or more will deactivate the key lock.