background image

 

20

operating correctly, then you should disconnect it 
from your mains supply and then contact the 

mber 

(0118) 933 6911. 

lease note that if an engineer is asked to attend whilst the product is 

liance must be accessible for the engineer to perform 

ny necessary repair. If your appliance is installed in such a 

his includes situations where appliances have been tiled in, 

installation other 

han the one specified by Baumatic Ltd. has been completed. 

appliance. 

MPORTANT: Baumatic Ltd. operates a policy of continuous 

provement and reserves the right to adjust and modify its 

roducts without prior notification. 

IMPORTANT: If your appliance appears not to be 

Customer Care Department on telephone nu

 
DO NOT ATTEMPT TO REPAIR THE APPLIANCE 
YOURSELF. 

 
P
under guarantee and finds that the problem is not the result of an 
appliance fault, then you may be liable for the cost of the call out 
charge. 
 
The app
a
way that an engineer is concerned that damage will be caused 
to the appliance or your kitchen, then he will not complete a 
repair.  
 
T
sealed in with sealant, have wooden obstructions placed in 
front of the appliance, like plinths. Or any 
t
 
Please refer to the conditions of guarantee that appear on the 
warranty card that you receive with the 

 

I
im
p

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание B65.5SS

























Отзывы: