5
PRE-COMMISSIONING THE APPLIANCE
When unpacked, check that the following parts are included with the appliance:
•
Instruction and Installation Book
•
Adhesive sealing agent and fixing clamps & screws
•
Ceramic hob scraper
INSTALLATION NOTES
1
Cut the aperture to the dimensions shown in the table below or use the template provided on
the packaging.
2
Invert the hob and apply the sealing agent provided to match the outer perimeter edge.
3
If the sealing agent is a strip type, the protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4
Insert the appliance into the aperture and fix into position via the clamps & screws, tightening
the screws evenly (see Fig.3).
Fig.3
HOB APERTURE DIMENSIONS
MODEL A B C D E
B11SS
580 510 560 490 40
