50 to 105° F (10 to 40° C) 30W
5 to 105° F
(-15 to 40° C)
5W-30 or 10W-30
-15 to 105° F
(-25 to 40° C)
Synthetic 5W-30
SAE 10W-30 or 5W-30 is recommended for
general use. Use a full synthetic for starting/
operating temperatures between 5 to -13° F (-15
to -25° C). Other viscosities shown may be used
when the average temperature in your area is
within the indicated range.
9.
Replace filler cap and dipstick.
10.
Close hydraulic cooler and tighten knobs (A).
Check Hydraulic Fluid Level
Check hydraulic fluid level before the engine is first
started and every 10 hours.
Attachments can raise or lower the hydraulic fluid
level. If a new attachment is connected, hydraulic
fluid needed to fill the lines, cylinders or motor will
lower the hydraulic tank fluid level. Check fluid level
each time a different attachment is connected.
1.
Skidsteer must be parked on a level surface,
lift arms fully lowered, engine stopped and key
removed.
B
A
2.
Check fluid level in sight glass (A). Hydraulic
fluid should fill approximately 50% of the sight
glass. If the level is low, add enough fluid to raise
it to the proper level. AW32 is recommended
for general conditions and climates. MV22 is
recommended for colder climates.
3.
Clean the area around hydraulic tank filler
neck.
4.
Remove the cap (B) from filler neck and add
hydraulic fluid as needed.
5.
Install the cap (B) on filler neck.
15
