Baumalight DSA530 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

Baumalight DSA530 Скачать руководство пользователя страница 16

• First, operate all functions in a clear area with

throttle at low idle to get a good feel for the

controls before you actually move into any

brush.

• Slow cutting speed if pressure surges up close

to max psi, doing this will greatly reduce blade

stoppage.

•

Run throttle only at half speed for first time

users.

• Move the tree saw slowly until you have a

better feel how much the unit can take.

• The machine is equipped with a front push bar

and an angled push bar to push brush or small

trees over. This will allow the tree saw teeth to

contact the lower portion of the brush and the

blade to cut it off.

• For tall brush, you can use the angled push

bar to push the brush over and cut it off close

to ground. Each operator must experiment to

find a technique that works for them in their

application.

^

WARNING

Always turn off the skid steer and

disengage hydraulic drive before

getting off the seat and approaching the

blade�

4�9 First Time User Tips

4�8 Hydraulic Connections

^

WARNING

Pressurized fluids can penetrate the

skin�

Disconnect and lock out power source

before disconnecting and/or connecting

hydraulic hoses�

The tree saw is equipped with three hoses,

pressure, return and case drain. Hydraulic

couplers are not provided with the tree saw. You

must install couplers and connect your skidsteer

pressure, return and case drain hoses to the tree

saw hoses.
Skidsteer hoses must be the same size as the

tree saw hoses. Using smaller diameter hoses will

decrease hydraulic flow.

D005405

14

«
...
14
15
16
17
18
...
»

Содержание DSA530





























Отзывы:

Нет отзывов