How to use
Service features
5V
Emergence power supply
When the battery is too low or completely dead and
the lock cannot be opened from ourside by inputting
master/user identification, connect a 5V power
supply via micro USB port at the bottom of exterior
trim. Then unlock the door with master/user
identification and replace all batteries immediately.
-----------------------------------------------------
-----------------------------------------------------
Restore to factory default settings
Operation instructions :
1.Open battery cover and find the reset button.
2.Press the reset button and keep pressing “ ” on touch
keypad to reset the system.
3.After that all user data and settings will be deleted.
Reset
button
When door is closed, slide privacy button upward to switch
on privacy mode.
When the privacy is turned on, only master identifications
and mechanical key can open the door from outside. User
identifications is prohibited.
Privacy mode
Low power warning and battery replacement
When the battery is lower than 4.8V, there is low power warning signal will appear
on the screen. Please replace all batteries immediately. Make sure the battery is
installed correctly according to the positive and negative pole.
-----------------------------------------------------
1.If passage mode is turned on, it will be turned off automatically
when privacy mode switched on.
2.Please refer to OPERATION MANUAL for the advance setting
of passage mode.
5