18
TROUBLESHOOTING GUIDE
1. The appliance is not working.
•Is there a power failure?
•Is the plug properly inserted in the socket?
•Is the double-pole mains switch on?
•Has the fuse blown?
•Is the power cord damaged?
•Is the thermostat set to
z
(Stop)?
2. The internal temperature is not low
enough.
•Is the door shut properly?
•Are the bottles preventing the door from
closing properly?
•Is the appliance installed near a heat source?
•Is the thermostat setting correct?
•Are the air circulation vents blocked?
3. The temperature inside the wine
cellar is too low.
•Is the thermostat setting correct?
4. The appliance is excessively noisy.
•Has the appliance been installed correctly?
•Are the pipes at the back touching or
vibrating?
5. Water collects at the bottom of the
cellar.
•Is the defrost water drain blocked?
Notes:
Gurgling and hissing noises due to expansion
in the refrigerant circuit are normal.
AFTER-SALES SERVICE
Before contacting the After-sales Service:
1. check first if you can solve the problem by
yourself (see “Troubleshooting guide”).
2. Switch the appliance on again to see if the
problem recurs. If it does, disconnect the
appliance from the power supply and wait for
about an hour before switching it on again.
3. If the problem persists after this course of
action, contact After-sales Service.
Specify:
•the nature of the problem,
•the model,
•the Service number (the number after the
word SERVICE on the data plate on the inside
of the appliance),
•your full address,
•your telephone number and area code.
Note:
The direction of door opening can be changed.
If this operation is performed by After-sales
Service it is not covered by the warranty.
41133001GB.fm Page 18 Thursday, October 28, 2004 12:07 PM
