16
HOW TO USE THE WINE CELLAR
Switching on the appliance
Starting up the appliance
All controls are on the outside of the appliance.
Plug in the appliance to start it running and set the thermostat (Figure A1) to the required temperature; a
green indicator light will come on (Figure A2) showing the appliance is on.
An interior light (Figure B1) comes on automatically when the door is opened or can be switched on as
required from the control panel (Figure A3).
When faulty or broken, request a replacement from our authorized personnel (After-sales Service)
Thermometer (Figure B2):
A digital thermometer is provided along with the appliance and can be found inside the bag with the
advertising materials.
When attached to one of the wooden racks inside the cellar, the thermometer will display the interior
temperature. The thermometer itself has a button cell battery which must be replaced when necessary.
Adjusting the temperature
1. To ensure the appliance functions correctly, set
the thermostat as explained in section
“Introduction to wine” (page 15).
2. To adjust the temperature in the compartment,
turn the thermostat control knob:
• to MIN for the LEAST COLD internal
temperature;
• to MED for a MEDIUM temperature;
• to MAX for the COLDEST temperature.
Thermostat setting on
z
: appliance functions and
interior light have been interrupted but the the
cellar is still powered on.
Note:
Ambient air temperature, frequency of door
opening and the position of the appliance can affect
internal temperatures. These factors must be taken
into account when setting the thermostat.
41133001GB.fm Page 16 Thursday, October 28, 2004 12:07 PM
