GB
If a fault occurs, before contacting our After-Sales Service, check the following troubleshooting guide to try
and remedy the problem (*see also the corresponding chapter in the user instructions).
WHAT TO DO IF...
Problem
Cause
Remedy
The appliance is not
working
•
No water supply.
•
Turn on the water tap.
•
The appliance doesn
’
t fill with
enough water.
•
Clean the filter in the water supply
tap.
•
Ensure the inlet water hose is not
kinked.
•
There is a power failure.
•
Insert the plug into the mains
socket.
•
Open the door.
•
Close the door.
•
Check the domestic circuit fuse.
If dishes are not
perfectly dry
•
Insufficient rinse aid.
•
Increase dispenser setting *.
•
Residual water in cavities.
•
Load dishes tilted at an angle.
If dishes are not
perfectly clean
•
The water spray does not reach the
dishes.
•
Arrange dishes so that items do not
touch each other.
Load dishes upside down.
•
Insufficient detergent.
•
Use the quantity of detergent
recommended by the manufacturer.
•
Unsuitable programme selected.
•
Select a more intense wash cycle.
•
Spray arms blocked.
•
The spray arms must be able to turn
freely.
•
Spray arm nozzles clogged.
•
Remove any particles obstructing
the water flow *.
•
Incorrect detergent/detergent too
old.
•
Use a good quality detergent.
Sandy or grainy
residues
•
Clogged filters.
•
Check filters regularly/clean if
necessary *.
•
Filters incorrectly installed.
•
Refit and lock the filters in place,
making sure they have been inserted
correctly *.
Colour of plastic
parts faded
•
Tomato/Carrot juice...
•
Depending on the material, if
necessary use a detergent with a
greater whitening power.
GB
D
