GB
D
GB
HOW TO USE THE APPLIANCE
Further indications are given in the individual chapters and in the user instructions.
Switch on the dishwasher
Press the
On/Off
button.
How to fill
the detergent dispenser
Large compartment
A
Small compartment
B
B
A
C
Check the rinse aid level
Mechanical indicator
C.
Electric indicator on control panel (if provided).
Check the
salt level
On models with water softener
system only.
Mechanical indicator
D
.
Electrical indicator light on control
panel
(if present).
D
Load the racks
Refer to the dishwasher loading instructions.
Select a programme
Press the
button until the desired programme lights up.
Select the
required options
If necessary (where present). The corresponding indicator light
illuminates/the display shows the relevant information.
Turn on the tap
water tap, then press the
start button to start the
programme
“
Cancel
”
“
Change programme in progress
”
Wash cycle
- Only open the door if necessary
(Warning: steam may escape).
- If the appliance is switched off
during a wash cycle, when
switched on again it will resume
the cycle from the point where it
was interrupted.
Switch off the appliance
At the end of the programme the dishwasher emits a brief audible signal.
Indicator lights 4 + 5 (marked by
“
end
”
on the control panel) illuminate.
Press the
On/Off
button.
All indicator lights switch off.
Turn off
the water tap, unload the
dishes from the racks
Warning: be careful opening the door, as steam will escape!
Empty the dishwasher starting from the bottom rack.
Press and keep pressed until an
acoustic signal confirm your selection
(the indicator lamp stops flashing and
remains lit).Press again and keep pressed
until the «end» indicator lamps light up.
P
All water in the tank will be drained and
the programme will be stopped
immediately.
Press and keep pressed until an
acoustic signal confirm your selection
(the indicator lamp stops flashing and
remains lit).
P
Select a new programme.
Start the programme.
