The timer can be used to set a max. cooking time of 99 minutes (1 hour and 39 minutes) for one
cooking zone only. Select the cooking zone to be used with the timer (an illuminated dot
appears to the bottom right hand side of the heat setting indicator on the display), then set the
desired cooking time using the buttons “+” and -“-” of the timer function (see figure on the left).
A few seconds after the button is pressed, the timer begins the countdown (the luminous dot of the selected
cooking zone starts flashing). Once the set time has elapsed, an acoustic signal sounds and the cooking zone
switches off automatically.
To deactivate the timer, press the button “-” until the display shows “0:0” or press the buttons “+” and “-” of the timer
at the same time.
2. OPERATING INSTRUCTIONS
PRECAUTIONS AND ADVICE
SWITCHING ON AND ADJUSTING COOKING ZONES
CHILD LOCK
TIMER
CONTROL PANEL
Child lock
Cooking zone controls and corresponding display
On/Off
Timer
Control panel graphics shown in these instructions might not match exactly the graphics of your hob.
Button’s functions are the same for all hob models.
To switch the hob on, press the button for approx. 2 seconds until the cooking zone displays light up. To switch
off, press the same button until the displays switch off. All the cooking zones are switched off.
If the hob has been in use, the residual heat indicator “H” remains lit until the cooking zones have cooled down.
The hob automatically switches off if no function is selected within 10 seconds of switching on.
Button -
Heat setting indicator
Selected cooking zone
indicator
Cooking zone
positioning
Switching off cooking zones
Select the cooking zone to be switched off by pressing the “+” or “-” key (a dot lights up at the bottom right hand side
of the heat setting indicator).
Press the key “-” to set the level to “0”.
The cooking zone can also be switched off by pressing keys “+” and “-” at the same time. The cooking zone switches off
and the residual heat indicator “H” lights up.
This function locks the hob controls to prevent accidental switching on by children. To activate the child lock
function, switch on the hob then press and hold the button for three seconds: an acoustic signal and a
luminous indicator under the key symbol signal activation.
The control panel is locked with the exception of the OFF function. To unlock the controls, repeat the child lock
activation procedure. The illuminated dot switches off and the hob is active again.
The presence of cleaning water, liquid spilled from pots or any objects resting on the button below the symbol can
accidentally activate or deactivate the child lock function.
Important!
The timer function can only be used with one cooking zone at a time.
After switching on the hob and positioning the pot on the
chosen cooking zone, adjust the heat setting using the
. When switched on, the display shows level 5. Each
cooking zone has different heat settings that can be adjusted
using the b/-, which go from “1”: min. heat setting to
“9”: max. heat setting. Some cooking zones have a fast boil
function (Booster), shown on the display with the letter “P”.
the symbols are not
active! To select the
desired functions,
touch the
areas below.
2
Содержание ETI 6160 IN
Страница 1: ...Instructions Manual 用戶手冊 ETI 6160 IN ...