4
DIAMOND CLEAN
The action of water vapor released during this
special cycle of cleaning by means of a low
temperature, facilitates removal of grime. Place
200 ml of drinking water on the bottom of the cavity
and activate the function when the oven is cold.
SETTINGS
For changing the oven settings (power, language,
time, audible signal volume, brightness, Eco mode).
Please note: When the oven is switched off but Eco mode is
active, the brightness of the display will be reduced to save
energy. It is reactivated automatically whenever any of the
buttons are pressed, etc.
FULLY AUTOMATIC RECIPES
To make sure that you use this function correctly,
read and download our recipe book from
docs. bauknecht . eu
For selecting one of 28 different preset recipes.
The oven will set the optimum cooking temperature,
function and time automatically.
USING THE APPLIANCE FOR THE FIRST TIME
1.
PLEASE SELECT LANGUAGE
You will need to set the language and the time when
you switch on the appliance for the first time: The
display will show you a list of available languages.
Please select language
Italiano
Português do Brasil
English
Press
or
to display the language you require
and confirm by pressing
.
Please note: The language can also be changed later from
the “Settings” menu item.
2.
SET THE TIME
After selecting the language, you will need to set the
current time: 12:00 will flash on the display.
Premere per impostare il tempo, OK per terminare
HH MM
12:00
Press to set time, OK when done
HH MM
Use
or
to set the time and confirm by pressing
.
Please note: The time will always need to be reset following a
power cut.
3. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of
electrical power that is compatible with a domestic
network that has a rating of more than 3 kW: If your
household uses a lower power, you will need to
decrease this value.
Use or
to select the “Settings” menu item, press
, select “Power” and press
to confirm.
Più di 2,5 kW
Bassa
Alta
Over 2.5 kW
Low
High
Use or
to select “Low” and press
to confirm.
4.
HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: This is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside it.
Heat the oven to 200 °C for around one hour, ideally
using a function with air circulation (e.g. “Forced Air”
or “Convection Bake”).
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
