BAUKER PSJ750G2, Оригинальное руководство пользователя

Страница: 6 / 20

EN-6
JIG SAW SAFETY WARNINGS
1. Hold reciprocating saw by insulated gripping
surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord.
Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and could
give the operator an electric shock.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding
the workpiece by hand or against your body leaves it unstable
and may lead to loss of control.
GENERAL SAFETY WARNINGS FOR YOUR LASER
WARNING: Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions
may result in serious injury.
Save all warnings and instructions for future
reference.
These lasers do not normally present an optical hazard although
staring at the beam may cause flash blindness.
Do not stare directly at the laser beam. A hazard may exist if you
deliberately stare into the beam, please observe all safety rules as
follows:
1. The laser shall be used and maintained in accordance with the
manufacturer’s instructions.
2. Never aim the beam at any person or an object other than the
work piece.
3. The laser beam shall not be deliberately aimed at another
person and shall be prevented from being directed towards the
eye of a person for longer than 0.25 seconds area.
4. Always ensure the laser beam is aimed at a sturdy work piece
without reflective surfaces, e.g. wood or rough-coated surfaces
are acceptable. Bright shiny reflective sheet steel or similar is
not suitable for laser applications as the reflective surface may
direct the laser beam back at the operator.
5. Do not change the laser device with a different type. The
manufacturer or an authorized agent must carry out repairs.