background image

58

57

Assure that the maintenance and repair of your power tool by a qualified repair person 
using only identical replacement parts. This will ensure that the safety of the power tool 
is maintained.

Service

Battery-powered tool use and care 

• The battery must only be charged with the charger specified by the manufacturer. A 
charger that is suitable for one type of battery can result in a fire risk if used with other 
types of batteries. 

• Only use the type of battery intended for the actual power tool. The use of any other 
type of battery can result in a risk of personal injury and fire. 

• When the battery is not in use keep it away from other metal objects such as 
paperclips, coins, keys, nails, screws and other small metal objects that can short circuit 
the two terminals. If the battery terminals are short-circuited this can result in burn 
injuries or a fire. 

• Incorrect use of the product can cause fluid to leak from the battery; avoid contact. 
Rinse immediately with plenty of water if you get fluid on your skin. Seek medical 
attention if you get fluid in your eyes. Fluids from the battery can cause skin irritation or 
burns. 

Safety

instructions

- Before using the charger, read all the instructions and cautionary markings on the 

charger and battery pack as well as the instructions on using the battery pack. 

- Only charge your batteries indoors as the charger is designed for indoor use only. 

DANGER

! If the battery pack is cracked or damaged in any other way, do not insert it 

in the charger. There is a danger of electric shock or electrocution. 

- WARNING

! Do not allow any liquid to come into contact with the charger. There is a 

danger of electric shock. 

Addtional safety rules chargers

- The charger and battery packs supplied with it are specifically designed to work 

together. Do not attempt to charge the battery pack with any other charger than the one 

supplied. 

- Do not pull on the power cord to disconnect it from the mains supply socket. 

- Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise 

damaged in any way. Take the charger to an authorised service centre for a check or 

repair.

- Do not disaseemble the charger. Take it to an authorised service centre when service 

or repair is required. Incorrect re-assembly may result in the risk of fire, electric shock 

or electrocution. 

- To reduce the risk of an electric shock, unplug the charger from the power supply 

before attempting to clean it. Removing the battery alone does not reduce the risk. 

- The battery pack for this tool has been shipped in a low charge condition. You should 

charge the battery pack fully before use. 

- Do not incinerate the battery pack even if it is seriously damaged or can no longer hold 

a charge. The battery pack can explode in a fire. 

- A small leakage of liquid from the battery pack may occur under extreme usage or 

temperature conditions. This does not necessarily indicate a failure of the battery pack. 

However, if the outer seal is broken and this leakage comes into contact with your skin 

wash the affected area quickly with soap and water. If the leakage gets in your eyes 

flush your eyes with clean water for a minimum of 10 minutes and seek immediate 

medical attention. 

Inform the medical staff that the liquid is a 25 % - 35 % solution o potassium hydroxide. 

- Never attempt to open the battery pack for any reason. If the plastic housing of the 

battery pack breaks open or cracks, inmediately discontinue its use and do not recharge 

it. 

-Do not store or carry a spare battery pack in a pocket or toolbox or any other place 

where it may come into contact with metal objects. The battery pack may be 

short-circuited causing damage to the battery pack, burns or a fire. 

CAUTION! 

This packaging contains sharp objects. Take care when unpacking. Remove the 

machine, together with the accessories supplied, from the packaging. Check carefully to 
ensure that the machine is in good condition and account for all accessories listed in this 
manual. Also make sure that all the accessories are complete. If any parts are found to be 
missing, the machine and its accessories should be returned together in their original 
packaging to the retailer. 
Do not throw the packaging away, keep it safe throughout the guarantee period, then 
recycle if possible, otherwise dispose of it by the proper means. Do no let children play with 
empty plastic bags due to the risk of suffocation. 

Unpacking

Содержание CID180JN-B








































Отзывы: