background image

EN-2

Important

 - Please read these instructions fully before starting assembly

General Power Tool Safety Warnings

PRODUCT SAFETY 

GENERAL SAFETY WARNINGS

 

WARNING!

 

Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future 

reference.

The appliance is only to be used with the power supply unit 

provided with the appliance.

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Safe operating practices

1. Training 

a)  Read the instructions carefully. Be familiar with the controls and the 

correct use of the machine. 

b)  Never allow children, persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge or people 

unfamiliar with these instructions to use the machine, local regulations 

may restrict the age of the operator.

c)  Keep in mind that the operator or user is responsible for accidents or 

hazards occurring to other people or their property. 

2. Preparation 

a)  Before use, always visually inspect the machine for damaged, 

missing or misplaced guards or shields. 

b)  Never operate the machine while people, especially children, or pets 

are nearby. 

3. Operation 

a)  Wear eye protection, long trousers and stout shoes at all times while 

operating the machine. 

b)  Avoid using the machine in bad weather conditions especially when 

there is a risk of lightning. 

c)  Use the machine only in daylight or good artificial light. 

d)  Never operate the machine with damaged guards or shields or 

without guards or shields in place. 

Содержание CGT18LW





















Отзывы: