Storage
14
WARNING:
If not done correctly, separating the stylus holder
37
from the stylus
cartridge
35
can cause damage to the parts. Use only identical replacement parts.
Never directly touch the stylus during replacement. Contact a qualified repair person
if you are having difficulties changing.
1. Lock the tone arm
30
and remove the stylus guard from the stylus cartridge.
2. Push down on the top edge of the stylus holder to detach it (see
Fig. 1
above).
3. Carefully remove the stylus holder (see
Fig. 2
above).
4. To assemble the new stylus, hold the front tip of the stylus holder and attach its
rear edge to the stylus cartridge (see
Fig. 3
above).
5. Carefully and gently push the tone arm and the stylus holder together (see
Fig. 4
above).
The new stylus is now ready for use.
Storage
• All parts must be completely dry before being stored.
• Remove all the vinyl record/CD/USB/SD/MMC cards from the device, then store the
device in a clean and dry place without direct sunlight.
• Move the device using two hands and hold it by the handle
27
.
• Keep the device out of the reach of children.
1.
2.
3.
4.
