Establishing a USB connection
24
The pairing of the two devices is complete when you hear the PAIRED message and
BT
is shown on the display
2
.
If the connection is disrupted, you hear the the DISCONNECTED message
− Hold the
button
25
on the remote control down for about 3 seconds to dis-
connect the current Bluetooth connection.
Establishing a USB connection
The USB connection enables the playback of MP3 fi les from an external USB storage
device such as a USB fl ash drive.
To connect a USB fl ash drive, proceed as follows:
− Connect the USB fl ash drive to the USB port
10
on the Soundbar.
− Switch the Soundbar on.
− Now press the
button
5
on the Soundbar repeatedly or the
17
USB
button
on the remote control.
USB
appears on the display
2
.
NOTICE!
The Soundbar supports MP3 fi les and USB drives with storage capacity of up to 32 GB
with FAT 32 formatting.
Audio playback in USB/Bluetooth
®
mode
If you have connected the Soundbar to a device that supports the A2DP profi le as well
as the AVRCP profi le (Audio Video Remote Control), the Soundbar is used as the output
medium and the audio signals are only outputted from the Soundbar.
NOTICE!
If you have connected the Soundbar to your Bluetooth-capable mobile phone, the
music playback is interrupted when there is an incoming call and is only continued
once the call has ended.
Start or stop the audio playback using the
25
button on the remote control.
