Setting up the Soundbar
22
If manual pairing is required, proceed as follows:
− Ensure that all required devices are connected.
− If necessary, switch the Soundbar off by pressing the
button
26
on the
remote control or on the Soundbar
4
.
− Press and hold down the
PAIR
button
15
on the back of the subwoofer.
The subwoofer connection display
16
starts to fl ash rapidly.
− Now switch the Soundbar on by pressing the
button
26
on the remote con-
trol or on the Soundbar
4
.
The subwoofer connection display
16
lights up continuously as soon as the Sound-
bar and the subwoofer are paired.
NOTICE!
If a TV or external device is connected via the AUX or HDMI connections, the Soundbar
switches on automatically after a few moments when the television or the external
device is switched on.
If the TV or external device is disconnected or switched off, the Soundbar automatical-
ly switches off after about 15 minutes.
If the volume of the television or external device is too low, the Soundbar also switch-
es off after about 15 minutes (only with a connection via AUX).
Selecting audio source
Using the
button
5
on the Soundbar or using the
17
OPT/COA
,
AUX
,
BT,
HDMI1/2
and
HDMI ARC
buttons on the remote control, set the desired audio source:
AUX, BT, HDMI ARC, coaxial or optical.
The mode selected is shown on the display
2
:
Indicator light
Mode
LED display ‘
.
’
Standby mode
LED display ‘
USB
’
USB mode
LED display ‘
BT
’
Bluetooth mode
LED display ‘
AUX
’
Modes for AUX
LED displays ‘
HDMI1 / HDMI2
’
Modes for HDMI1 or HDMI2
LED display ‘
COA
’
Modes for Coaxial in
LED display ‘
OPT
’
Modes for Optical in
LED display ‘
ARC
’
Modes for HDMI ARC
