15
After Sales Support
Telephone:
1300 884 987
Email: [email protected]
General operating functions
Audio functions
NOTE!
The description applies to audio output on the connected speakers. Where devices with separate speakers are connected,
you can of course adjust the sound on those devices.
Volume
Press the
X Q N -
button on the remote control or turn the volume adjuster on the device clockwise to increase the volume.
Press the
X Q N
⁄
"
button on the remote control or turn the volume adjuster on the device anti-clockwise to decrease the volume.
Switch sound off – MUTE
Press the
button on the remote control to turn the sound off completely.
MUTING
will appear on the display.
Press the
button on the remote control to turn the sound back on again.
MUTING
disappears from the display.
Bass/Treble
Press the
D C U U 1 V T G D N G
button once or multiple times until the desired
BASS
or
TREBLE
function appears on the display.
Use
X Q N " / 1 -
to set the desired bass and treble.
X-bass
X-bass allows you to activate or deactivate a bass boost using the remote control.
Press the
Z / D C U U
button on the remote control. The display will show
X-BASS
. The function is activated.
Press the button again to deactivate X-bass again. The message on the display will disappear.
Setting clock time
Proceed as follows to set the clock:
Press the
E N Q E M 1 V K O G T
button on the remote control while the device is switched on.
Confirm within 10 seconds using the
G P V G T
button.
To set the day, press
or
and confirm your selection with
G P V G T
. Days are displayed in the English format: MON =
Monday, TUE = Tuesday, WED = Wednesday, THU = Thursday, FRI = Friday, SAT = Saturday, SUN = Sunday.
Now use the
or
keys to choose either a 12- or 24-hour format and confirm with
G P V G T
.
Use the
or
keys to select the desired hour and confirm with
G P V G T
.
Press
or
to set the desired minutes. Confirm with
G P V G T
.
Finally, press the
E N Q E M 1 V K O G T
button again to save the settings.
Using the timer
The timer allows you to have the device start up in a particular mode at a particular time. The device offers two types of timer:
•
The one-off timer is shown in the display with
and starts the device once only at the set time for a specific duration.
•
The daily timer is shown in the display with
F C K N[
and starts the device at the same time for a specified duration every day.
You can set both timers separately. There must be an interval of at least 1 minute between the chosen times.
To use the timer function, the time must be set as described above.
