Bauhn HE214018, Инструкция по эксплуатации

Страница: 11 / 16

11
After Sales Support - Help Desk
Telephone: 1300 663 907
Internet: www.winplus.com.au
Tip: When you replace the batteries as required, replace all the batteries at
the same time. Do not mix old and new batteries.
Pairing the Headphones to the Base
The Bauhn Cordless Headphones feature 3 different channels, this way you can
operate up to 3 different Cordless Headphone units at the same time without
interference.
1. When the base unit is powered by either batteries or directly connected to
mains power, switch on the headphones by selecting ON or BATT on the
ear pad.
2. Connect the base unit to your audio device using the included cables.
The LED on the front of the base unit will turn blue when it detects audio
input.
3. Select the channel you wish to use for your Cordless Headphones. The
switch used to toggle between channels 1 to 3 is found on the rear of the
base unit.
4. Ensure “AUDIO” is selected on the right ear pad.
5. Press the Scan button on the side of the right ear pad to scan for the
channel you selected. You may need to press scan a few times to correctly
tune to the correct channel.
FM Radio
The Bauhn Cordless Headphones include a built-in FM radio function.
1. Switch on the headphones by selecting ON or BATT on the left ear pad.
2. Select FM mode on the right ear pad.
3. Press the SCAN button to cycle between available radio stations.
4. You may need to press SCAN a few times to find the station you wish to
listen to.
5. Adjust volume to desired level using the VOL + and VOL - Buttons.