9
1300 886 649
Model: AWBS-0818-W Product Code: 61485 08/2018
www.tempo.org
AUS
50mm
c) Using the masonry bit, pre-drill three holes;10mm in diameter and 50mm
deep at each marked spot on a concrete or brick wall (see Fig. 2 below).
WARNING: Do not drill into mortar joints.
d) Place the masonry plugs (B) into the holes and gently tap them with a
hammer until they are flush with the wall (Fig. 3).
Installation (Cont.)
10mm Diameter
masonry bit
(B) x 3
TV Mounting
Plate
Fig. 2
e) Use the three screws (A) to affix the Swing Arm Wall Bracket (K) into the
anchors in the wall, as illustrated below (Fig. 4), and then tighten the
screws securely. Push back the plastic cover from the top side and then
push the bottom side.
(A) x 3
Fig. 4
Fig. 3
(A) x 3
