10
1300 886 649
Model: AWBS-0818-W Product Code: 61485 08/2018
www.tempo.org
AUS
(F-H) Screws
TV
(C-E) Washers
Fig. 5
Step 2: Attaching the TV to the TV mounting plate
For TVs with 75x75, 100x100, 100x200 and 200x200 VESA patterns:
a) When the wall plate is properly attached to the wall, pull the swing arm
out as far out from the wall as possible.
b) Lay your TV face-down on a flat surface, and on something soft so as
not to scratch the TV screen. Check the back of your TV to find the
appropriate mounting pattern.
c) On the rear of the TV, locate the screw holes used for attaching a wall
bracket. Position the assembled TV mounting plate over these holes.
Select the appropriate bolts (F/G/H) and washers (C/D/E) that fit the
thread holes at the back of your TV monitor.
NOTE: Due to the many varieties of television, you may need to visit your
local hardware supplier to find the correct bolt and washer sizes.
d) Insert the four selected bolts through the appropriate washers (C/D/E)
and the corresponding holes on the TV mounting plate into the thread
holes on the back of the TV, then tighten the bolts.
e) Carefully lift TV and hook the TV mounting plate over the swing arm. Do
not let go of the TV until the it is securely in place on the swing arm.
f) Tighten the locking bolt using a Philips-head screwdriver to secure the
TV. This will help ensure that your TV does not fall off the wall mount
during use.
NOTE: Ensure you have two people to perform steps (e) and (f) to avoid
damaging the TV or causing injury.
Installation (Cont.)
