After Sales Support TEL: 1300 886 649
8
For using the remote control, follow these instructions:
1. Open the back cover of the remote control, then insert two AAA batteries with polarities
matching with the marks inside the battery compartment. Then, close the back cover.
2. Point the remote control towards the infra-red remote sensor on the main unit.
If there is an obstacle between the main unit and remote control, the remote control may not
operate properly.
3. Replace the batteries immediately once the remote control is found not to work properly.
4.
Do not mix new batteries with old ones, or batteries of different brands.
5.
When the battery is exhausted, electrolyte-leaking may occur and damage the remote control.
When the operation is not activated, the batteries may be weak, so please replace the batteries.
6. If the remote control is not to be used for a long period of time, please remove the batteries to
avoid electrolyte leaking.
