After Sales Support TEL: 1300 886 649
29
FAQ’s
NO POWER
•
Check if the fuse or circuit breaker is working.
•
Plug another electrical device into the outlet to make sure it is
working or turned on.
•
Power plug has bad contact with the outlet.
•
Check the signal source.
NO COLOUR
•
Change the colour system.
•
Adjust the saturation.
•
Try another channel.
Black-white program may be received.
REMOTE CONTROL
DOES NOT WORK
•
Change the batteries.
•
Batteries are not installed correctly.
•
Main power is not connected.
NO PICTURE,
NORMAL SOUND
•
Adjust the brightness and contrast.
•
Broadcasting failure may happen.
NORMAL PICTURE,
NO SOUND
•
Press the volume up button to increase volume.
•
Volume is set to mute, press MUTE to restore sound.
•
Change the sound system. Broadcasting failure may happen.
UN ORDERLY RIPPLES ON
THE PICTURE
It is usually caused by local interference, such as cars, daylight lamps
and hair driers. Adjust the antenna to minimize the interference.
BLANK SCREEN IN
VGA MODE
Perhaps the TV can not recognize the resolution set by the PC.
Suggest to change to the best resolution or other standard
resolutions of the system.
SNOWY DOTS,
PIXILATION AND
INTERFERENCE
If the antenna is located in the fringe area of a television signal where
the signal is weak, the picture may be marred by dots. When the signal
is extremely weak, it may be necessary to install a special antenna to
improve the reception.
•
Adjust the position and orientation of the indoor/outdoor antenna.
•
Check the connection of antenna.
•
Fine tune the channel.
•
Try another channel. Broadcasting failure may happen.
DIGITAL NOISE
Black spots or horizontal streaks appear, or the picture flutters or
drifts. This is usually caused by interference from car ignition system,
neon lamps, electric drills, or other electrical appliance.
GHOST ON ANALOGUE
TV
Ghosts are caused by the television signal following two paths. One
is the direct path, the other is reflected from tall buildings, hills, or
other objects. Changing the direction or position of the antenna may
improve the reception.
RADIO FREQUENCY
INTERFERENCE
This interference produces moving ripples or diagonal streaks, and
in some case, loss of contrast in the picture. Find out and remove the
radio interference source.
