8
1300 886 649
Model: ARTTSC-1117 Product Code: 55688 11/2017
www.tempo.org
AUS
Getting Started/Instructions
Initial Set-Up
AC Power
Ensure that the mains voltage of your home corresponds to the operating
voltage of the adapter.
• Connect the Power adapter to the wall outlet.
• Connect the DC connector to the “DC IN” jack on the rear of the unit.
Playing a Record
• Place a record on the turntable. If required, place the 45 RPM adaptor
on the record spindle.
• Choose the desired playing speed (33, 45 or 78 rpm) by using the
speed selection switch.
• Turn on the rotary power switch (note that this also controls volume).
• Release the tone arm lock.
• Raise the arm using the cue lever and move the arm away from its
holder. This will prompt the turntable to start spinning automatically.
• Use the cue lever to slowly place the stylus down onto the record’s
groove.
• If the AUTO STOP switch is set to ON, the record will stop
automatically. If it is set to OFF, the record will not stop automatically.
NOTE: If your record stops before the last track finishes, set the AUTO
STOP switch to OFF. Your record will now play to the end, but you will
have to stop the turntable rotation manually.
Auto Stop
• When a record finishes playing, the turntable plate can be set to stop
turning automatically. This function controlled by the auto-stop ON/
OFF switch.
• Set the auto-stop switch to ON so that the turntable plate
automatically stops turning.
• Raise the tone arm and put it on the rest when finished.
• Replace the protective cap on the stylus/needle and close the tone
arm lock.
