12
1300 886 649
Model: ACB-014 Product Code: 47923 12/2015
www.tempo.org
AUS
Instructions (Cont.)
CD Operation
• Insert a CD as described on the previous page.
• Slide the function switch to CD/LINE IN: the CD will spin momentarily and then the
display will show the total number of tracks on the disc.
• Press the PLAY/PAUSE
button: the disc will start spinning and the first song
(track) will start playing. The display will indicate the current track number (“01”
if it is the first track).
• At any time during playback, press the STOP button to stop operation of the set.
This will reset the CD player to the first track. (If you press PLAY after STOP, the first
track will always start playing.)
• At any time during playback, press the PLAY/PAUSE
button to pause operation
of the unit. Press the PLAY/PAUSE
button to resume operation at the same track
and position.
• At any time during playback, quick press the BACK
or NEXT
button to skip
backwards or forwards by one track, as desired.
• At any time during playback, press and hold the BACK
or NEXT
button to
fast-reverse (review) or fast-forward (cue) the specific track that is currently playing.
Programming a CD
• Insert a CD as described on the previous page, then play the CD as described
above.
• Press the STOP button to stop the CD during playback.
• Press the PROGRAM button, “01” will begin flashing on the display.
• Press the
/
SKIP/SEARCH buttons to select a track.
• Press the PROGRAM button to save the selected track to the program.
• Repeat the last two steps above to program up to 20 tracks.
Repeat Playback Function
• At any time during playback, press the REPEAT button as follows:
• Press once to repeat the current track: the display will show:
• Press twice to repeat all tracks (the whole CD): the display will show:
• Press a third time to cancel the repeat function.
