Page 3
For technical questions, please call 1-888-866-5797.
Item 64754 64756
Sa
F
ety
Opera
ti
O
n
Maintenance
Setup
c�
Do not expose power tools to rain or wet
conditions.
Water entering a power tool
will increase the risk of electric shock.
d�
Do not abuse the cord. never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.
e�
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f�
if operating a power tool in a damp location
is unavoidable, use a ground fault circuit
interrupter (GFci) protected supply.
Use of
a GFCI reduces the risk of electric shock.
3�
personal safety
a�
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication.
A moment
of inattention while operating power tools
may result in serious personal injury.
b�
use personal protective equipment. always
wear eye protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c�
prevent unintentional starting. ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger
on the switch or energizing power tools that
have the switch on invites accidents.
d�
remove any adjusting key or wrench
before turning the power tool on.
A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e�
Do not overreach. Keep proper
footing and balance at all times.
This
enables better control of the power
tool in unexpected situations.
f�
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewelry or long hair
can be caught in moving parts.
g�
if devices are provided for the connection
of dust extraction and collection
facilities, ensure these are connected
and properly used.
Use of dust collection
can reduce dust-related hazards.
h�
Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles.
A careless action can cause
severe injury within a fraction of a second.
i� Only use safety equipment that has been
approved by an appropriate standards agency�
Unapproved safety equipment may not provide
adequate protection� Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the
specific hazards in the work area�
j� Do not lay the tool down until it has come to
a complete stop� Moving parts can grab the
surface and pull the tool out of your control�
k� When using a handheld power tool,
maintain a firm grip on the tool with
both hands to resist starting torque�
l� Do not leave the tool unattended when the
Battery Pack is connected� Turn off the tool,
and remove the Battery Pack before leaving�
m� This product is not a toy�
Keep it out of reach of children�
n� People with pacemakers should
consult their physician(s) before use�
Electromagnetic fields in close proximity to
heart pacemaker could cause pacemaker
interference or pacemaker failure�
o� The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur� It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator�
4�
power tool use and care
a�
Do not force the power tool. use the correct
power tool for your application.
The correct
power tool will do the job better and safer
at the rate for which it was designed.
b�
Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with the switch
is dangerous and must be repaired.
c�
Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d�
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
