Bauer Ecostar 6000, Руководство по эксплуатации, Страница: 6 / 39

Operating Manual for
BAUER ECOSTAR 6000
6
Pre/post irrigation:
A pre/post-irrigation is activated by pressing the button once briefly . The left button is for pre-irrigation
and the right button for post-irrigation. To deactivate the pre/post-irrigation, the button must be pressed
again once briefly .
If pre/post-irrigation is activated, the button turns green and displays the text “on”.
To
configure
the pre/post-irrigation, the button must be
pressed and held for thee seconds
, which opens
the following dialog window:
In this dialog window, you
first enter the distance
after which the pre-irrigation should be started, then
press the button (left). For post-irrigation, first enter the desired distance of the arm to the machine
then confirm this with the button.
Next, enter the time in minutes for which the machine should irrigate in place and then press the
button.
Start time:
To activate a start time, briefly press the button next to start time. To configure a time, the button must be
held down. You can then enter a time at which the machine should start automatically. If the start button is
pressed now, the machine switches to the status “waiting to irrigate” and the irrigation will start at the
configured time.
Stop time:
The stop time calculated based on the configured speed is shown in the button next to the stop time.
Pressing this button will also switch from display of the stop time to the irrigation duration. Press it again or
restart the control to display the stop time again.