Page 4
For technical questions, please call 1-888-866-5797.
Item 58162
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Service
Have your power tool serviced by a qualified repair person using only identical replacement
parts.
7KLVZLOOHQVXUHWKDWWKHVDIHW\RIWKHSRZHUWRROLVPDLQWDLQHG
Safety Warnings common for Grinding, Sanding,
polishing, or Abrasive cutting-off Operations
1.
This power tool is intended to function as
a grinder, sander, polisher, or cut-off tool.
Read all safety warnings, instructions,
LOOXVWUDWLRQVDQGVSHFLILFDWLRQVSURYLGHG
ZLWKWKLVSRZHUWRRO)DLOXUHWRIROORZDOO
instructions listed below may result in
electric shock, fire and/or serious injury.
2.
Do not use accessories which are not
specifically designed and recommended
by the tool manufacturer.
Just because
the accessory can be attached to your
SRZHUWRROLWGRHVQRWDVVXUHVDIHRSHUDWLRQ
3.
The RATED SpEED of the accessories
must be at least equal to the operating
speed setting marked on the power tool.
Accessories running faster than their
5$7('63(('FDQEUHDNDQGIO\DSDUW
4.
The outside diameter and the thickness
of your accessory must be within
the capacity rating of your power
tool.
Incorrectly sized accessories
cannot be adequately controlled.
5.
The arbour size of wheels, sanding
drums or any other accessory must
properly fit the spindle or collet of
the power tool.
Accessories that do
not match the mounting hardware of the
SRZHUWRROZLOOUXQRXWRIEDODQFHYLEUDWH
excessively and may cause loss of control.
6.
Mandrel MOUNTED WHEELS, sanding
drums, cutters or other accessories
must be fully inserted into the collet or
chuck.
If the mandrel is insufficiently held
and/or the overhang of the wheel is too
long, the MOUNTED WHEEL may become
loose and be ejected at high velocity.
7.
Do not use a damaged accessory.
Before
HDFKXVHLQVSHFWWKHDFFHVVRU\VXFKDV
DEUDVLYHZKHHOVIRUFKLSVDQGFUDFNV
sanding drum for cracks, tear or excess
wear, wire brush for loose or cracked wires.
,ISRZHUWRRORUDFFHVVRU\LVGURSSHG
LQVSHFWIRUGDPDJHRULQVWDOODQXQGDPDJHG
DFFHVVRU\$IWHULQVSHFWLQJDQGLQVWDOOLQJDQ
DFFHVVRU\SRVLWLRQ\RXUVHOIDQGE\VWDQGHUV
DZD\IURPWKHSODQHRIWKHURWDWLQJDFFHVVRU\
DQGUXQWKHSRZHUWRRODWPD[LPXPQRORDG
VSHHGIRURQHPLQXWH'DPDJHGDFFHVVRULHV
ZLOOQRUPDOO\EUHDNDSDUWGXULQJWKLVWHVWWLPH
8.
Wear personal protective equipment.
'HSHQGLQJRQDSSOLFDWLRQXVHIDFH
shield, safety goggles or safety glasses.
$VDSSURSULDWHZHDUGXVWPDVNKHDULQJ
SURWHFWRUVJORYHVDQGZRUNVKRSDSURQ
FDSDEOHRIVWRSSLQJVPDOODEUDVLYHRU
ZRUNSLHFHIUDJPHQWV7KHH\HSURWHFWLRQ
PXVWEHFDSDEOHRIVWRSSLQJIO\LQJGHEULV
JHQHUDWHGE\YDULRXVRSHUDWLRQV7KH
GXVWPDVNRUUHVSLUDWRUPXVWEHFDSDEOH
RIILOWUDWLQJSDUWLFOHVJHQHUDWHGE\\RXU
RSHUDWLRQ3URORQJHGH[SRVXUHWRKLJK
intensity noise may cause hearing loss.
9.
Keep bystanders a safe distance away
from work area.
Anyone entering the
ZRUNDUHDPXVWZHDUSHUVRQDOSURWHFWLYH
HTXLSPHQW
)UDJPHQWVRIZRUNSLHFHRURID
broken accessory may fly away and cause
LQMXU\EH\RQGLPPHGLDWHDUHDRIRSHUDWLRQ
10.
Hold power tool by insulated gripping
surfaces only, when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord.
Cutting accessory contacting a
³OLYH´ZLUHPD\PDNHH[SRVHGPHWDO
SDUWVRIWKHSRZHUWRRO³OLYH´DQGFRXOG
JLYHWKHRSHUDWRUDQHOHFWULFVKRFN
11.
Always hold the tool firmly in your
hand(s) during the start-up.
The reaction
torque of the motor, as it accelerates to
IXOOVSHHGFDQFDXVHWKHWRROWRWZLVW
