Page 3
For technical questions, please call 1-888-866-5797.
Item 56401
S
AFE
ty
Op
ERA
ti
O
n
M
A
int
E
n
A
n
CE
S
E
t
U
p
Electrical Safety
Do not expose power tools to rain or wet conditions.
:DWHUHQWHULQJDSRZHUWRROZLOOLQFUHDVHWKHULVNRIHOHFWULFVKRFN
personal Safety
1.
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication.
A moment
RILQDWWHQWLRQZKLOHRSHUDWLQJSRZHUWRROV
PD\UHVXOWLQVHULRXVSHUVRQDOLQMXU\
2.
Use safety equipment. Always wear eye
protection.
6DIHW\HTXLSPHQWVXFKDV
dust mask, non-skid safety shoes, hard hat,
RUKHDULQJSURWHFWLRQXVHGIRUDSSURSULDWH
FRQGLWLRQVZLOOUHGXFHSHUVRQDOLQMXULHV
3.
prevent unintentional starting. Ensure
the switch/trigger is in the off-position
before connecting to power source and/
or battery pack, picking up or carrying the
tool.
&DUU\LQJSRZHUWRROVZLWK\RXUILQJHU
RQWKHVZLWFKRUHQHUJL]LQJSRZHUWRROVWKDW
have the switch on invites accidents.
4.
Remove any adjusting key or wrench
before turning the power tool on.
$ZUHQFKRUDNH\OHIWDWWDFKHGWRDURWDWLQJSDUW
RIWKHSRZHUWRROPD\UHVXOWLQSHUVRQDOLQMXU\
5.
Do not overreach. Keep proper footing and
balance at all times.
This enables better control
RIWKHSRZHUWRROLQXQH[SHFWHGVLWXDWLRQV
6.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewelry
RUORQJKDLUFDQEHFDXJKWLQPRYLQJSDUWV
7.
if devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
these devices can reduce dust-related hazards.
8. Only use safety equipment that has been approved
by an appropriate standards agency. Unapproved
safety equipment may not provide adequate
protection. Eye protection must be ANSI-approved
and breathing protection must be NIOSH-approved
for the specific hazards in the work area.
power tool Use and Care
1.
Do not force the power tool.
Use the correct power tool for your application.
7KHFRUUHFWSRZHUWRROZLOOGRWKHMREEHWWHUDQG
safer at the rate for which it was designed.
2.
Do not use the power tool if the switch/trigger
does not turn it on and off.
$Q\SRZHUWRROWKDWFDQQRWEHFRQWUROOHGZLWKWKH
VZLWFKWULJJHULVGDQJHURXVDQGPXVWEHUHSDLUHG
3.
Disconnect the battery pack from the
power tool before making any adjustments,
changing accessories, or storing power
tools.
6XFKSUHYHQWLYHVDIHW\PHDVXUHVUHGXFH
WKHULVNRIVWDUWLQJWKHSRZHUWRRODFFLGHQWDOO\
4.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
5.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. if damaged, have the
power tool repaired before use.
Many accidents
DUHFDXVHGE\SRRUO\PDLQWDLQHGSRZHUWRROV
6.
Keep cutting tools sharp and clean.
3URSHUO\PDLQWDLQHGFXWWLQJWRROVZLWK
VKDUSFXWWLQJHGJHVDUHOHVVOLNHO\WR
bind and are easier to control.
7.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
SRZHUWRROIRURSHUDWLRQVGLIIHUHQWIURPWKRVH
intended could result in a hazardous situation.