Page 12
For technical questions, please call 1-888-866-5797.
Item 56401
S
AFE
ty
Op
ERA
ti
O
n
M
A
int
E
n
A
n
CE
S
E
t
U
p
Grinding instructions
tO pREVEnt SERiOUS inJURy: Grip the tool firmly in both hands.
1. Make sure that the Trigger Switch is in the
“OFF” position, then connect the battery pack.
2. Place one hand on the motor housing and the
other on the side handle before starting the tool.
3. Start the tool by pressing the Trigger Switch
down and then forward until it locks in place.
4. Allow the tool to come up to full speed
before touching the work material.
5. Apply the wheel to the work material at a 10°–
15°
angle, allowing the tool to operate at full speed.
If the tool bogs down, use lighter pressure.
6. To create a smoother surface,
keep the tool moving over the work surface.
7.
tO pREVEnt ACCiDEntS, AFtER USE:
Turn off the tool by pushing the
Trigger Switch backward.
WARninG! tO pREVEnt SERiOUS inJURy: Allow
the tool to come to a complete stop before setting
it down.
Remove the tool’s Battery Pack. Clean, then
store the tool indoors out of children’s reach.
