SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Website :
www.baudcom.com.cn
Tel: +86 21 37709251 Email: [email protected]
Figure 3-22:WAN Settings
Parameter
Description
Interface
The interface of WAN connection which system will distribute
automatically according to the current wan connections
If you want to create a new WAN connection, please select “New
Link” and input other WAN Parameters at the same time and then
click “Apply Changes” button. If you want to modify/delete WAN
connection, please select the WAN interface which you want to
change and then click “Apply Changes” button.
VLAN
Enable VLAN
Checked indicates the packets are transmitted by the PON port
take VLAN tag. Unchecked indicates the packets are transmitted
by the PON port don’t take VLAN tag.
VLAN ID
Input the VLAN ID you want to set. Range is 1~4094. Usually
VLAN 1 donot use.
802.1P
Select VLAN priority you want to set. Range is 0~7.
Default empty (means 0)
Multicast VLAN
Input the VLAN ID you want to set,according to the IPTV
Configuration.This option default value is empty,means no use.
Channel Mode
Bridge/IPoE/PPPoE.
Bridge mode:ONU works on bridge mode.
IPoE mode:ONU works on Route mode,wan connection get the IP
