Batterytech E-Gen 400, Руководство пользователя

Страница: 4 / 4

Replacing the Battery
1. Ensure that the unit is unplugged and the Power Switch is in the OFF position.
2. Detach the battery cables from the battery terminals.
3. Replace the battery. Be very careful not to short the battery terminals.
4. Ensure that the Power Switch is in the OFF position. Attach the RED cable to the positive (+) terminal
followed by the BLACK cable to the negative (-) terminal of the battery. Ensure that the connection is
secure. Note that sparking may occur when the cables first touch the battery terminal.
5. Plug in the E-Gen to a wall socket outlet.
6. Turn on the socket outlet.
7. Leave the Power Switch in the OFF position. The GREEN Battery LED will illuminate. After some
time, the LED will repeatedly illuminate for a certain period and turn itself off.
Specifications
Parameter E-Gen 400
Input Voltage (AC)
Voltage (DC)
220 - 250 V
10 -15 V
Current (AC)
Current (DC) 2 A (Fuse: 13 A)
60 A (Fuse: 25 A x 3)
Standby Current < 0.1 A
Output Voltage 230 V ± 10 %
Frequency 50 Hz ± 3 Hz
Continuous Power 400 W
Surge Power 1,000 W
Efficiency 85 % - 90 %
Waveform Modified Sine Wave
Socket Universal Type
Battery Rating 75 Ah Deep Cycle
Low Alarm 10.8 V ± 0.3 Vdc
Low Shutdown 10.4 V ± 0.3 Vdc
Polarity Protection Fuse
Charging Current 8 A Pulse Charging
Thermal Protection 60 o C ± 5 o C
Overload Protection Microcontroller Controlled
Output Short Circuit Microcontroller Controlled
UPS Changeover 10 ms
Dimensions (mm) 380 (L) x 340 (H) x 220 (W)
Weight 25 kg
Duration Load
50 W
100 W
200 W
300 W
500 W
12 hours
6 hours
2.5 hours
1.5 hours
1 hour
info@batterytechsolutions.com www.batterytechsolutions.com