background image

BCA1123 

– 140729                                                       

 

 

Technical Specifications: 
 

Model:

 BCA1123 

Input:

 Auto-switching 100V- 240VAC      50/60Hz 

Output: 

12VDC 3.8A / 12A (Lead Acid), 12VDC 9A (LiPO), 12VDC 12A (LiFePO4)   

Max Charge Current:    12 A

 

Max. Voltage: 14.8V

Lead 

–Acid (Pb) Battery charging

   

                          14.5V (LiFe Po4 Battery charging) 

   

                         

16.9V (LiPo Battery charging) 

 

                                                           

Overcharge Protection:

 Yes 

Short Circuit Protection:

 Yes 

Spark Proof:

 Yes 

Overload Protection:

 Yes 

Reverse Polarity Protection:

 Yes 

Over Heat Protection:

 Yes 

*Battery Capacity:

 Charging LEAD ACID - 12V 3.8A (MAX. 240 Ah); 12V 12A (MAX. 480Ah) 

Maintenance - all sizes

 (

For Lead 

–Acid Battery charging only) 

                     

 

 

*Charger Selection and Use

   

Charge and maintenance capacity ranges are suggested only as a guide for battery charger selection and 

application based on varied customer charging and maintenance requirements. Please be sure to follow safety and 

use information in user guide for correct product application and use. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание BCA1123










Отзывы: