The packaging of the product is recyclable. Do not dispose of electrical
appliances or batteries in household waste, but please follow current
regulations.
TROUBLESHOOTING
PROBLEM
SOLUTION
The charger is connected to power outlet and
jump starter’s 12V socket, but the charger’s
red LED blinks slowly (Error: battery not
connected).
C
heck that the jump starter’s switch is on 12V.
Verify that the jump starter’s 12V socket is working, by
connecting whatever 12V device (for example, a 12V
lamp).
The battery charger cannot complete the
charge.
One of the
jump starter’s batteries might be defective or
the battery charger might be damaged. Please try
recharging another 12V battery with the battery charger
to verify whether the same problem occurs.
The battery charger works perfectly and it
completes the charge, but
the jump starter’s
digital voltmeter doesn’t turn on.
The voltmeter button might be damaged. Please verify
with a voltmeter on the jump starter’s clamps the battery
voltage / state of charge..
The
device is fully charged but it doesn’t
work.
Make sure the cables and clamps of the jump starters
are intact and that they are well connected to the poles
of the vehicle battery. Check there is voltage on the
clamps, otherwise check that the safety fuse is not
broken.
The vehicle’s battery might be defective.
When a 12V accessory gets connected to
the 12V socket, a strange noise is heard.
The 12V adapter of the connected device could be
defective, causing the switch to interrupt. The 12V device
could require too much current.
F.A.Q.
QUESTION
ANSWER
How many jumpstarts can be done before to
recharge the jump starter?
1 to 30 jumpstarts, according to the temperature, the
vehicle’s conditions, the engine type and capacity.
Is it possible to replace the ju
mp starter’s
battery?
Yes, please ask your Dealer for information.
Which is the best storing temperature?
Ambient temperature. The jump starter works also with
temperatures below 0°C, but it can lose power. High
temperatures bring to a faster discharge.
Can I use another battery charger to
recharge the device?
No, use only the provided battery charger BC SMART
4000.
The jump starter is a fragile product?
Yes, it is necessary to follow all instructions carefully.
TECHNICAL DATA & CONTACTS
Voltage
12/24 Volt
BC BATTERY CONTROLLER
CISLIANO (MI)
– ITALY
Peak Current (PA)
5000A 12V / 2500A 24V
Cranking Current (CA)
1700A 12V / 850A 24V
Battery Capacity
2 x 12V 22Ah
Cables Section
50 mm2
Cables Length
150 cm
External Fuse
500A
Dimensions
350 x 300 x 600 mm
Weight
21.5 Kg
BC JUMPSTARTER TRADITIONAL 12-24V
USER’S MANUAL
1. 12V/24V/OFF Switch (keep it on OFF when
the jump starter is not used)
2. 12V socket for recharging jump starter
3. Voltmeter button
4. Digital voltmeter
5. Alarm for short circuit / reverse polarity
6. Trolley handle
7. Rails for cable winding
8. Supports for clamps
Thank you for purchasing the jump starter BC JUMPSTARTER TRADITIONAL 12/24V,
provided with two sealed AGM batteries. Please always follow the basic principles and
precautions necessary when working near a 12V or 24V battery, read all the instructions
carefully and keep this user manual for reference. The device is designed exclusively for
starting vehicles with 12V or 24V lead-acid batteries.
IMPORTANT NOTE: BEFORE FIRST USE, RECHARGE THE STARTER COMPLETELY
WITH THE CHARGER BC SMART 4000 SUPPLIED.
1 - SAFETY INSTRUCTIONS
1. Keep out of reach of children or persons with reduced physical/mental abilities or lack
of experience, unless under the supervision of a responsible person. The product is not
a toy.
2. Wear protective goggles, gloves, ear muffs and appropriate clothing (never vinyl)
during use. Do not wear metal objects. Keep fire extinguisher and water handy. Make
sure there is someone who can provide assistance.
3. Use only original accessories provided and recommended by the manufacturer.
4. Any modification or alteration to the device is prohibited.
5. Never pull the charger cables, even when disconnecting the plug from the socket.
6. Do not charge the appliance with damaged accessories. In the event of damage or
failure of the supplied charger, request repair or replacement from the dealer.
7. The starter can be used in any weather conditions (rain, snow, hot or cold weather). Do
not recharge in a damp environment. Do not attempt to start a frozen battery. Do not
immerse the booster in water or liquids, do not expose to splashes.
8. Never put the red clamp in contact with the black clamp and do not place the two
clamps in contact with the same metal object, to avoid any risk of a short circuit.
9. To avoid any risk of short circuit and to protect the positive (red) and negative (black)
clamps, always hook the clamps to their supports when not in use. The appliance is
equipped with lateral rails for winding the cables.
10. Do not expose the device to flames or sources of heat. Do not smoke when using it nor
use in presence of flammable/explosive liquid/gas/dust. Use in ventilated environment.
11. In the event of faults or failures, do not attempt to repair the jump starter, but always
contact your dealer. Any tampering or attempted repair in autonomy will result in the
invalidity of the warranty.
12. Never allow the jump starter to discharge completely and charge it periodically.
Damages caused by a deep discharge may be irreversible.
1
4
3
2
1
5
8
4
6
7
7
3
4
