Dehumidifier
Thank you for purchasing a LOCKDOWN Dehumidifier Rod. When properly used, it
will provide you with years of trouble free service. Please read all instructions
below before attempting to use the rod.
Safety Warnings:
- The Dehumidifier Rod is for indoor use only and is not intended for
outdoor use.
- Do not immerse unit, plug, or cord in water or allow contact with
liquids.
- Do not operate rod in presence of explosives or flammable fumes.
- Do not operate rod if cord is damaged.
- Make sure unit is unplugged when installing or handling.
- Do not use plug included with this dehumidifier on any other device.
- Do not use any other plug on this dehumidifier.
Installation Instructions:
Install Dehumidifier Rod on a dry level surface. It should be oriented horizontally and as
low as possible inside the safe.
1. Install the electrical cord through the safe wall. From the inside of the safe, push the
end of the cord through the wall to the outside. Many safes have a pre-drilled electrical
access hole near the bottom usually in the rear. If no access hole exists you will need to
drill one. If the safe features an internal electric outlet, you will not need to route the cord
through the wall of the safe.
2. Install the mounting clips to hold the rod. The rod must be mounted horizontally and
should be as low as possible in the safe. Be sure the rod will not interfere with any of the
safes hinges or locking lugs. Use the included screws to attach the clips to the safe
interior.
Product #222-000 & #222-010
