Bathology Spectrum 620-C, Инструкция по установке и эксплуатации

Страница: 15 / 24

15
by
Operation - Interior Operation - Interior
Power Button: Power Button: Press and hold for two
seconds to turn the Touch Interface and
Salt Light Fixture on or off. Restores
most recent settings.
Touch Toggle: Touch Toggle: Press down on the wheel
at any point with your finger to select a
color, brightness, or pre-programmed
scene depending on which mode you
are in. Dragging your finger across the
wheel in each mode will result in the
following:
- In color mode, shift in color gradually.
- In brightness mode, shift in brightness
gradually.
- In pre-programmed scene mode, shift
in pre-programmed scene of colors.
Color and brightness are recalled when
the control is turned off and on.
Touch Toggle
Power Button
Brightness Mode
Color Mode
Color Mode
“1” Button
(Red / Scene 1)
“4” Button
(White / Scene 4)
“2” Button
(Green / Scene 2)
“3” Button
(Blue / Scene 3)
Pre-Programmed
Scene Mode
Color Mode : Color Mode : Press and hold for two
seconds to enable Color Mode.
- 1: Red
- 2: Green
- 3: Blue
- 4: White
Pre-Programmed Scene Mode: Pre-Programmed Scene Mode: Press
and hold for two seconds to enable
Pre-Programmed Scene Mode.
- 1: Red > Magenta > White >
Turquoise > Green > Yellow > White
> Magenta > Blue > Turquoise >
White > Yellow.
- 2: Red > Yellow > Green > Turquoise
> Blue > Magenta.
- 3: Yellow > Turquoise > Magenta.
- 4: Faster version of 1.
P B
C
S
1 2 3 4