Bathology Spectrum 620-C, Инструкция по установке и эксплуатации

Страница: 14 / 24

14
S p e c t r u m 6 2 0 - C & 6 2 6 - C
Installation - Himalayan Salt Panel (Phase 2) Installation - Himalayan Salt Panel (Phase 2)
1. From determined Salt Panel
Assembly (A) location, mark a
level line for height of Salt Panel
Assembly (A). (Helpful Tip: Use
a piece of 2x4, level and secure
to wall at determined height
temporarily to be used as a
ledger to support Salt Panel
Assembly (A))
2. The Salt Panel Assembly (A)
fixture may weigh up to 55
lbs. and require additional
framework or support. ¾”
Plywood is recommended to
help support the weight of the
fixture(s). See diagram on page
4.
3. Mount Salt Panel Assembly
(A) onto wall securing with
provided Mounting Screws (C)
into predrilled mounting holes.
4. After mounting Salt Panel
Assembly (A) slide in 4 Salt
Blocks (B) over Mounting Screw
(C) locations.
5. Connect Light Extension Cable
(E) to Salt Panel Assembly (A)
lead to complete assembly.
6. Repeat this process for each
additional Himalayan Salt Panel
Assembly, if any. A maximum
of 3 panel (each 48” x 12”)
or 7 panel (each 16” x 16”)
assemblies can be powered by a
single control.
7. Each Salt Panel Assembly (A)
has 2 connection points. Male
and female. Connect male from
one panel to female of another
for each additional panel.
8. Trim Boards (D) have been
supplied for either recessed or
surface installations.