Cascade 1700 & 1500
INSTALLATION GUIDE
The bath is supplied with 6 supporting feet and
adjusted to nominal height of 510mm to keep the
door threshold/step at its lowest height for user
comfort. Bath is filled only when user has entered
and shut door consequently taps must be
thermostatically controlled.
Installation is similar as for a standard bath except
that twin wastes are supplied to increase drainage
rate & to ensure the bath can be drained if one
waste fails. The bath should be installed rigidly to
ensure there is no movement or sagging of the floor
when bath is used.
Consideration should be given to lowering the wastes
below the floor level to keep the step threshold to a
minimum to assist customer’s ability to step into the
bath. Use only shallow waste traps.
If fitting in an alcove ensure the bath freely goes into
position (as sideways pressure can distort the
doorway).
The bath is manufactured in glass fibre with a gel-coat
surface. When handling, proceed with care; in
particular the bath edges are more brittle than in
acrylic baths.
THE CASCADE BATH IS SUPPLIED
WITH THE FOLLOWING:
– Bath LH or RH Door (1700 or 1500mm Length)
– Front Panel
– Twin Waste Kits
– 2 x Wall Fixing Brackets
OTHER ITEMS POSSIBLY
SUPPLIED WITH BATH
– Thermostatic valve 22mm
(Must be installed in all cases)
– Bath Taps / Shower Mixer
OPTIONAL ITEMS
Universal end panel (not handed)
1
IMPORTANT NOTES
SHOWN AS RHS BATH ( as door position)
DIMENSIONS (NOMINAL) 1700 (or 1500) x 690 x 510 mm
510mm
DOOR STEP
THRESHOLD
165mm
700
65
(50)
380
320
(325)
1695
(1500)
60
(50)
80
The Cascade 1500 dimensions shown in brackets
minimum
