BATH BUDDY BATHMATE, Инструкция

Страница: 11 / 20

9
Safety Information
1. This appliance is not intended for use by persons
(including children) with severely reduced physical,
sensory or mental capabilities, unless they are
supervised by a person responsible for their safety
or fully understand the hazards involved when
using the product.
This appliance is not intended for use by children
unless they are continually supervised.
Children should not be allowed to play with, or
undertake the cleaning and maintenance of the
appliance.
2. As a safety measure the blower unit will switch
The cushion will no longer inflate even if the
control unit UP button is continuously depressed.
In the unlikely event of this failing air will
automatically bleed back through the motor,
thus ensuring over inflation does not occur.
If the blower unit continues to operate for more
than 20 second inflate the cushion has fully
inflated, release the UP button and consult your
dealer for advice.
3. For your safety, ensure that in the event of an
electricity power failure, or the unlikely event of
product failure, that an alarm system or telephone
are conveniently placed in close proximity. The
unit will NOT operate should this occur during use,
therefore, assistance may be required to leave the
bath.
4. Inflation and deflation can be interrupted at any
time by releasing the appropriate button on the
control unit. Please note that on inflation the UP
button should be depressed until the blower unit
stops automatically.
5. There is no electrical connection in or to the
hand control unit. This unit is therefore safe to
be operated by either user or attendant with wet
hands. The blower unit, however is connected to
the mains electricity and should not be handled
with wet hand unless disconnected from the
electricity supply.
6. Should the cushion slide even if the suckers and
bath surface appear to be clean and dry please
contact your supplier for advice.
7. An alternative method of placing the cushion in
inflate the cushion fully outside of the bath.
Position the cushion square in the bath in line
so that all 4 suckers make contact with the
bottom flat part of the bath. Press down on
the semi deflated cushion checking that all
four suckers are attached by gently pulling
on the cushion.