36
P1512120 R3
Move the control handle toward the hopper or intake to raise the hopper cloth, and move the handle toward
the outlet or spout end to collapse the hopper cloth, see
Figure 12 on page 36
.
Figure 12.
Collapsible Hopper Handle
4.7. Conveyor Operating Angles
The conveyor lift can set the tube angle up to 30° when operating. Because the belt does not have roll back
barriers, the material will roll back if the angle is too steep. Do not position the conveyor at an angle steeper
than the grain will roll back (angle of repose) of the material to be moved.
Note
The lower the angle, the greater the capacity of the conveyor.
The following table indicates the maximum angle a conveyor can move grain.
To roughly determine conveyor angle, use angle guide on right. Stand the manual (vertically) on conveyor tube
and hold a string with a weight attached to end against the top of this page. Weighted end of string will fall
between degree lines, and from this the approximate angle of the conveyor can be determined.
4. PLACEMENT
PORTABLE GRAIN BELT CONVEYOR – S-DRIVE FIELD LOADER