1
I Main specification
NO.
MODEL
PSR-5014
1
Max rolling width
40’’ (1010mm)
50’’ (1280mm)
2
Max rolling thickness
16gauge(1.5mm)
14gauge(2.0mm)
3
Rolling diameter
2’’(50mm)
3’’(75mm)
4
Rotate speed
22rpm
22rpm
5
Motor Power
0.75kw
1.5kw
6
Overall dimension
1285x520x935(mm)
1650x530x960(mm)
7
Weight
350kg
440kg
II Machinery general safety warnings
1. Misuse of this machine can cause serious injury. For safety, machine must be set up,
used and serviced properly.Read, understand and follow instructions in the
operator’s
and parts manual which was shipped with your machine.
2. Wear proper apparel. No loose clothing or jewelry which can get caught in moving
parts. Gloves and rubber soled footwear is recommended for best footing.
3. Do not overreach. Failure to maintain proper working position can cause you to fall
into the machine or cause your clothing to get caught
— pulling you into the machine.
4. Keep guards in place and in proper working order. Do not operate the machine with
guards removed.
5. Avoid dangerous working environments. Do not use stationary machine tools in wet or
damp locations. Keep work areas clean and well lit.
6. Avoid accidental starts by being sure the start
switch is “OFF” before plugging in the
machine.
7. Never leave the machine running while unattended. Machine shall be shut off
whenever it is not in operation.
8. Disconnect electrical power before servicing. Whenever changing accessories or
general maintenance is done on the machine, electrical power to the machine must be
disconnected before work is done.
9. Machinery must be anchored to the floor.
10
. Use the right tool. Don’t force a tool or attachment to do a job it was not designed for.
11. Keep hands in sight and clear of all moving parts and rolling surfaces.
12. All visitors should be kept at a safe distance from the work area. Make workshop
completely safe by using padlocks, master switches, or by removing starter keys.
13. Know the tool you are using
— its application, limitations, and potential hazards.
14. General Electrical Cautions :This machine should be grounded in accordance with
the National Electrical Code and local codes and ordinances. This work should be done
by a qualified electrician. The machine should be grounded to protect the user from
electrical shock.
BATAVIA MACHINERY - 877-528-2809
BATAVIA MACHINERY - 877-528-2809