Batavia 7063487, Руководство по эксплуатации

Страница: 10 / 50

English
8
9. Inflating with the low pressure
hose
The low pressure hose ls used to inflate low
pressure items, such as air mattresses,
pools, and floats.
Note: A pinch valve adaptor (4) comes as
part of the inflating nozzle assembly that is
attached to the end of the low pressure
hose. The pinch valve adaptor is used for
items that have a smaller air opening or
pinch valve. Insert pinch valve adaptor into
pinch valve, insuring that the tip of the adap-
tor is inserted past the inner “flap” inside the
valve. When inflating, ensure that the tip is
not blocked during inflation.
• To attach the low pressure hose, align
the slots in the hose with the pins on
the sides of the inflation flange (9) .
• Turn the hose clockwise as far as it will
turn.
• Use the suitable adaptor to connect the
hose to the item to be inflated.
• Set the main switch (2) to low pressure
“I” to start inflating.
• When the desired pressure is reached
set the main switch to “O” and close the
valve of the item inflated.
• Remove the hose by turning it counter
clockwise as far as it will turn and
removing it from the inflation flange.
• Store the hose in hose wrap on the left
side of the compressor.
Note: Always leave low pressure hose free
of obstructions and with pinch valve adap-
tor off when not in use. Overheating could
occur if the low pressure hose ls blocked.
10. Deflating with the low pressure
hose
The low pressure hose, when placed in the
deflation flange (8) , can be used to remove
air from inflated items.
• Place the hose inside the deflation
flange (8) .
• Set the main switch to low pressure “I”
to start deflating.
• When the item has been deflated, turn
the main switch to “O”.
• Remove the hose by pulling if from the
deflation flange.
• Store the hose in hose wrap on the left
side of the compressor.
11. Use of the adaptors
The high pressure air hose can be used with
the provided adaptors to inflate a variety of
items.
• Insert the adaptor (or needle) into the
air chuck and push the air chuck clamp
down until it locks into place. Inflate to
the desired pressure.
• Remove the adaptor by lifting the air
chuck clamp up and pulling the adaptor
(or needle) from the air chuck.
The supplied accessories perform a variety
of functions.
The tapered adaptor can be used on smaller
pinch valves to inflate items like floats and
children’s toys, which usually require the
user to inflate them by blowing air into item.
The sport ball needle can be used to inflate
any type of sports ball or any other item that
requires an inflation sport ball needle.
11.1
How to use the sport ball needle
• Insert the needle into the air chuck on
the high pressure hose (6) and push the
air chuck clamp down until it locks into
place. Inflate to the desired pressure.
• Insert the moistened sport ball needle
into sports ball valve and inflate.
• Remove sport ball needle from the ball
and from the air chuck after Inflation.
Note: The pressure required for most
sports balls ls too low for accurate reading
on gauge.