Batavia 7063093, Руководство по эксплуатации

Страница: 9 / 42

7
English
power tool with a clean cloth or blow
over it with low pressure compressed air.
• We recommend that you clean your elec-
tric power tool immediately after each
use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap. Do not use any cleaning or solvent
materials; these can attack the device’s
plastic components. Make sure that no
water can get inside the electric power
tool.
11.2
Maintenance
There are no inner parts of the tool which
need maintenance.
12. Technical data
No load speed: . . . . . . . . . . 12000 min
-1
Eccentricity: . . . . . . . . . . . . . . . 1 mm
Sanding surface:. . . . . 140 × 140 × 80 mm
Dimensions of sanding paper:
. . . . . . . . . . . . . . . 140 × 140 × 80 mm
Weight: . . . . . . . . . . . . . . . . . . 0.8 kg
Weighted sound pressure level L
pA
: 70.3 dB(A)
Uncertainty K
pA
: . . . . . . . . . . . . 3 dB(A)
Weighted sound power level L
WA
: 81.3 dB(A)
Uncertainty K
WA
: . . . . . . . . . . . . 3 dB(A)
Hand/arm vibration:. . . . . . . 11.240 m/s
2
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
2
12.1
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
• the times when the tool is switched off or
when it is running but not actually doing
the job, may significantly reduce the
exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
13. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as such
can either be reused or can be fed back into
the raw material cycle. The electric power
tool and its accessories are made from vari-
ous materials such as metals and plastics.
Take defective components to a special
refuse collection point. Ask about these at
your specialist shop or local council.
13.1
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is. Do not
dispose of batteries with domestic refuse. Do
not dispose of by burning, risk of explosion.
14. EC-Declaration of conformity
We, the Batavia B.V., Weth. Wassebali-
estraat 6d, NL-7951 SN Staphorst, declare
by our own responsibility that the product
Cordless multi sander, Item-No 7063093,
Model Nr. BT–CDS001 is according to the
basic requirements, which are defined in the
European Directives Electromagnetic Com-
patibility 2014/30/EU (EMC), 2006/42/EC
(Machinery), RoHS: 2011/65/EU and their
amendments. For the evaluation of con-
formity, the following harmonized standards
were consulted:
EN62841-1:2015
EN62841-2-4:2014
AfPS GS 2014:01
EN55014-1:2017
EN55014-2:2015
Staphorst, 22 April 2020
Meino Seinen, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.