English
30
.
REPAIR AND ORDERING OF SPARE
PARTS
Exchanging the power cable
If the power cable of this electric power tool is
damaged, it must be replaced by the manufac-
turer, its customer services department or a
similarly qualified person to avoid danger.
Spare parts/Accessories
Spare parts can be ordered through the Cus-
tomer Service using the following information:
• Type of device
• Model of the unit
• ID number of the device
Transport
• Do not lift the tool by the mains cable
• Transport the tool in its original packaging
to avoid transport damage
• Remove all accessories before transport-
ing the tool
Storage
Store the tool and its accessories in a dark, dry
and frost free environment, inaccessible to
children. The perfect storage temperature is
between 5 and 30°C. Always keep the tool in
the original packaging. Clean the tool before
storage.
TROUBLESHOOTING
Symptom
Possible Causes
Possible Solution
Tool will not start when
operating the on/off switch.
Power cord not plugged in.
Power cord is broken.
Carbon brush has worn
down.
Check to make sure power
cord is connected well into a
working outlet.
Unplug the power cord.
Replace it by a qualified
maintenance person.
Replace the carbon brush by
a qualified maintenance
person.
Cutting depth is less than that
is set.
Sawdust accumulated,
blocking the base.
Shake out sawdust. Consider
connecting a vacuum for dust
collection.
Blade spins or slips
Blade is not tightly engaged
with the spindle.
Remove the blade, and
reassembled it as described
in install /change the Blade
section.
Blade will not cut a straight
line.
Blade is dull.
Blade is not mounted
properly.
Saw is not being guided
properly.
Mount a new, sharp blade on
the saw.
Check that blade is properly
mounted.
Use and edge guide.
7062413-digital-display-MA-#-1604-19.indb 30
11-05-16 11:37
