Battery Charger MVD
User's Manual
It's possible to scroll between each programs using the buttons UP/DOWN, and press ENTER
to modify or skip each single parameter.
ERROR SETTING IN CURVE PARAMETER
If the user insert the parameter not correct during the set of internal programs (curves), when
you try to work with this program, the charger don't start and the display show:
You must entry in a menu of this program and check the parameters in errors.
The display show ERROR SETTING even you try to work with a program that are all steps
A,B,C,D,E,F empty.
In this way the PROG NR.1 not work.
MVD
-
-BASSI
Page 10 of 34
ERROR
SETTING
1.A PAU
T= DIS.
I=DIS.
V=DIS.
1.D PAU
T= DIS.
I=DIS.
V=DIS.
1.B PAU
T= DIS.
I=DIS.
V=DIS.
1.C PAU
T= DIS.
I=DIS.
V=DIS.
1.E PAU
T= DIS.
I=DIS.
V=DIS.
1.F PAU
T= DIS.
I=DIS.
V=DIS.
