Reel Care And Lubrication
Your new reel is designed to provide years of dependable service. But like any
other precision machine, periodic cleaning and maintenance is required for
continued peak performance.
Reels made today require both a lightweight oil and grease. Oil and grease should
be used sparingly; too much can have a negative impact on reel performance.
There are lightweight oils and grease made specifically for fishing reels that can be
found at
basspro.com
As a rule of thumb, oils should be used to lubricate any moving part on the reel,
e.g. ball bearings, bushings, handle joints, bail springs, etc. Grease should be used
to lubricate the main drive gear and pinion gear.
We do not recommend using any multipurpose oils. Many of these oils have
properties that will attract dirt and dust to the internal parts. This may cause
excessive wear and reduce the life of the reel.
After each trip, the reel should be checked for dirt or sand. If it has been exposed
to saltwater, the spool should be removed and the entire reel rinsed in freshwater.
Dry with a soft cloth and lubricate the reel as described above.
For professional cleaning and maintenance, send your reels postage prepaid to:
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
Phone: (417) 873-5274 Fax: (417) 873-5280
Bass Pro Shops
®
Fishing Reels:
Limited Warranty
Bass Pro Shops will repair or replace (at our discretion) any Extreme
®
Tourney
fishing reel which proves to be defective in workmanship or materials within one
year from the original date of purchase. You must save your dated sales receipt for
warranty validation. This warranty gives you specific legal rights, and you may have
other rights which vary from state to state or province to province.
For reels purchased through our catalogs or Bass Pro Shops online:
• For reel replacement only:
Return your reel postage prepaid with your dated
sales receipt to the Return Center address listed on your receipt.
• For reel repair only:
Return your reel postage prepaid with a copy of your dated
sales receipt as proof of purchase and warranty validation to the Outdoor World
Rod & Reel Repair
®
address below.
For reels purchased through Bass Pro Shops retail locations:
• For reel replacement only:
Return your reel (postage prepaid if sending
by mail) along with your dated sales receipt to the store from which it was
purchased.
• For reel repair only:
Return your reel postage prepaid with a copy of your dated
sales receipt as proof of purchase and warranty validation to the Outdoor World
Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to abuse,
accidents, or normal wear. Failure to clean, lubricate and provide reasonable and
necessary maintenance will void the warranty. Repairs needed to your reel due to
abnormal use or modification, or after warranty expiration, are available for a
reasonable charge from Outdoor World Rod & Reel Repair, providing the reel is
returned postage paid.
Except to the extent prohibited by applicable law, there are no warranties or
conditions, express or implied, other than those expressly set out herein. Bass Pro
Shops shall not, under any circumstances, be liable for an amount greater than the
actual purchase price of the product nor for any special, incidental, or
consequential damages suffered or incurred in connection with the product and
Bass Pro Shops does not assume, and does not authorize any person to assume
for it, any obligation or liability other than those expressly set out herein.
BP132493
Reel Specifications
Gear
Weight
Max
Line Capacity
Model
Bearings
Ratio
IPT
(oz.)
Drag (lbs.)
mono (lb./yds.)
XTT10A
10 (9+1)
5.1:1
22"
6.9
11
4/235, 6/175, 8/120
XTT20A
10 (9+1)
5.1:1
24"
7
11
6/210, 8/160, 10/115
XTT30A
10 (9+1) 5.1:1 28" 9.5
13
8/205, 10/170, 12/130
XTT40A
10 (9+1) 5.1:1 30" 10
13
10/235, 12/195, 14/160
• 10-Bearing System (9+1)
• Powerlock™ Instant Anti-Reverse
• Double-anodized spool
• 5.1:1 Gear Ratio
Features and Operations Instructions
Lightweight Graphite Frame
The frame was designed to be lightweight, durable, and corrosion-resistant.
Anodized-Aluminum Spool
The spool has been double-anodized to provide years of corrosion resistance.
Drag Setting
Your reel is equipped with a drag system to help you fight fish without the risk of
breaking your line. To properly set the drag, you will need a spring scale. Your drag
should be set at 25% of the test rating of your line. Tie a loop in the end of your
main line. Run it through the guides of your rod and attach it to the hook on the
scale. Pull the scale until it registers 25% of the line rating. If you are using 6 lb. test,
then you should set your drag to start slipping at 1.5 lbs.
Powerlock™ Instant Anti-Reverse
This model is equipped with a Powerlock instant anti-reverse system. This is a
special type of bearing that allows the handle to only turn forward. There is no play
in the handle, so you have complete control during the retrieve and no “loose”
feeling, which is important during stop-and-go retrieves.
Congratulations on your purchase of an Extreme
®
Tourney spinning reel! This reel is
manufactured with the highest-quality components and has been extensively tested
to ensure that your day on the water is more productive. The Extreme Tourney was
designed with a lightweight graphite frame and double-anodized-aluminum spool to
resist corrosion. The 10-bearing system, including our Powerlock™ instant
anti-reverse, keeps the drive train moving smoothly.
XTT10A, XTT20A, XTT30A, XTT40A
basspro.com
PART
NO. NAME
1
DRAG KNOB ASSEMBY
2
SPOOL BALL BEARING
3
SPOOL ASSEMBLY
4
CLICK GEAR WASHER
5
CLICK GEAR
6
BRASS NUT
7
PINION SQUARE PLATE
8
MAIN SHAFT
9
BAIL HOLDER SCREW
10
BAIL HOLDER
11
BAIL WIRE
12
LINE ROLLER CAP
13
LINE ROLLER WASHER
14
LINE ROLLER
15
LINE ROLLER BALL BEARING
16
LINE ROLLER WASHER
17
BAIL ARM
18
LINE ROLLER SCREW
19
BAIL ARM SCREW
20 ROTOR
21
BAIL TRIP PLUNGER
22
BAIL ARM TRIP SHAFT
PART
NO. NAME
23
TRIP PLUNGER SPRING
24
ROTOR BAIL ARM COVER
25
ROTOR BAIL ARM COVER SCREW
26
BRASS PINION WASHER
27
BALL BEARING COVER PLATE SCREW
28
BALL BEARING COVER PLATE
29
PINION BALL BEARING
30
ONE-WAY CLUTCH SLEEVE
31
ONE-WAY CLUTCH SPRING
32
ONE-WAY CLUTCH
33
PINION BALL BEARING
34
BRASS PINION GEAR
35
ANTI-REVERSE SHAFT
36
ANTI-REVERSE SPRING
37
ANTI-REVERSE LEVER
38
ANTI-REVERSE LEVER SCREW
39
HANDLE SCREW CAP
40
HANDLE SCREW CAP WASHER
41 BODY
42
OSCILLATION SLIDER PLATE
43
OSCILLATION SLIDER PLATE SCREW
44
BODY DECORATE REAR COVER SCREW
PART
NO. NAME
45
REAR COVER
46
REAR COVER SCREW
47
OSCILLATION GEAR
48
OSCILLATION SLIDER
49
OSCILLATION SLIDER SCREW
50
OSCILLATION GEAR BALL BEARING
51
OSCILLATION GEAR SCREW
52
BODY BALL BEARING
53
DRIVE GEAR
54
BODY COVER WASHER
55
BODY COVER BALL BEARING
56
BODY COVER
57
BODY COVER SCREW
58
BODY COVER SCREW
59
HANDLE ASSEMBLY
60
HANDLE KNOB BALL BEARING
61
HANDLE KNOB PIN
62
HANDLE KNOB
63
HANDLE KNOB BALL BEARING
64
HANDLE KNOB COVER
26
23
24
25
6
7
9
22
20
21
8
5
3
10
4
11
12
13
16
18
15
19
14
17
29
32
31
28
27
30
51
50
48
52
49
47
53
54
37
38
36
35
40
34
33
39
41
59
55
43
42
58
44
45
46
57
56
60
61
62
64
2
1
63
