Basler slA1000-30fm, Руководство пользователя, Страница: 95 / 166

I/O Control
Basler scout light 87
8 I/O Control
This section describes how to configure the camera’s physical input line and physical output line. It
also provides information about monitoring the state of the input and output lines.
For more detailed information about the physical and electrical characteristics of the input and
output lines, see Section 5.4 on
page 28 .
8.1 Configuring the Input Line
8.1.1 Assigning the Input Line to Receive a
Hardware Trigger Signal
The camera is equipped with one physical input line designated as input line 1. You can assign the
camera’s input line to receive a external hardware trigger (ExTrig) signal. The incoming ExTrig
signal can then be used to control image acquisition.
Section 6.3.2 on page 47 explains how to configure the camera to react to a hardware trigger signal
and how to assign the input line to receive the hardware trigger signal.
Note
By default, physical input line 1 is assigned to receive the ExTrig signal.