Basler slA1000-30fm, Руководство пользователя

Страница: 42 / 166

Physical Interface
34 Basler scout light
5.7.3 Output Line Description
5.7.3.1 Voltage Requirements
The following voltage requirements apply to the I/O output VCC (pin 10 of the 12-pin receptacle):
5.7.3.2 Output Line Schematic
The camera is equipped with one physical output line designated as output line 1. The output line
is accessed via the 12-pin receptacle on the back of the camera.
As shown in the I/O schematic, the output line is opto-isolated. See the previous section for the
recommended operating voltage. The absolute maximum voltage is +30.0 VDC. The maximum
current allowed through an output circuit is 100 mA.
A conducting transistor means a logical one and a non-conducting transistor means a logical zero.
Figure 13 shows a typical circuit you can use to monitor the output line with a voltage signal.
Voltage Significance
< +3.3 VDC The I/O output may operate erratically.
+3.3 to +24 VDC Recommended operating voltage.
+30.0 VDC Absolute maximum; the camera may be damaged if the absolute maximum is exceeded.
Table 8: Voltage Requirements for the I/O Output VCC