manualshive.com logo in svg

Basler L800k, Руководство пользователя

Поделиться
Скачать
Basler L800k Скачать руководство пользователя страница 101

Configuring the Camera

BASLER L800

k

4-15

Draft

Field Name:

 Absolute Min

Offset:

 0x0005

Size:

 4 Bytes

Type:

 Read only

Description:

Minimum allowed floating point value for the absolute exposure time setting. This field is 
updated to reflect limitations caused by the way any related features are set.

The value in this field is a standard IEEE-754 single precision (32 bit) floating point number.

Field Name:

 Absolute Max

Offset:

 0x0009

Size:

 4 Bytes

Type:

 Read only

Description:

Maximum allowed floating point value for the absolute exposure time setting. This field is 
updated to reflect any limitations caused by the way any related features are set.

The value in this field is a standard IEEE-754 single precision (32 bit) floating point number.

Field Name:

 Raw Exposure Time

Offset:

 0x000D

Size:

 4 Bytes

Type:

 Read / Write

Description:

Writing an integer value to this field sets the exposure time.

The value can normally range from 150 (0x000096) to 1500000 (0x16E360). The actual 
available range may be limited by the way any related parameters are set.

The integer value represents a multiplier and the actual exposure time is equal to the value 
in this field times 2/30 µs. For example, if the value in this field is set to 1200 (0x0004B0), 
then: 

Exposure Time  = 1200  x  (2/30) µs

Exposure Time  = 80 µs

The 4 bytes in this field are interpreted as follows:

Byte 1 = Low byte of the raw value

Byte 2 = Mid byte of the raw value

Byte 3 = High byte of the raw value

Byte 4 = Always 0x00 (not used)

See Section 

3.4

 for more information about exposure time.

Field Name:

 Raw Min

Offset:

 0x0011

Size:

 4 Bytes

Type:

 Read only

Description:

Minimum allowed integer value for the raw exposure time setting. This field is updated to 
reflect limitations caused by the way any related features are set.

The 4 bytes in this field are interpreted as follows:

Byte 1 = Low byte of the min value

Byte 2 = Mid byte of the min value

Byte 3 = High byte of the min value

Byte 4 = Always 0x00 (not used)

Field Name:

 Raw Max

Offset:

 0x0015

Size:

 4 Bytes

Type:

 Read only

Description:

Maximum allowed integer value for the raw exposure time setting. This field is updated to 
reflect limitations caused by the way any related features are set.

The 4 bytes in this field are interpreted as follows:

Byte 1 = Low byte of the max value

Byte 2 = Mid byte of the max value

Byte 3 = High byte of the max value

Byte 4 = Always 0x00 (not used)

Содержание L800k









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды